The following guide highlights 22 inch and nearby length PVC pipe options that are commonly used in home improvement, plumbing, irrigation, and DIY furniture projects. Each product profile includes core specifications, typical applications, and installation considerations to help you compare quickly. The selection focuses on Schedule 40 PVC pipes and common fittings that pair with 22 inch lengths for reliable, long-lasting performance.
| Product | Brand | Length / Size | Key Uses |
|---|---|---|---|
| Schedule 40 PVC Pipe – 0.84″ OD | Generic | 18 Inches | Drainage, cold water, pool and spa installations |
| 3/4 In Schedule 40 PVC Pipe – 18” | Generic | 18 Inches | Residential plumbing, drainage, cold water |
| 2 Inch PVC Pipe – 17” Long | CKVIHAV | 17 Inches | DIY projects, greenhouse, furniture frames |
| 1/2 Inch PVC Pipe – 17” Long | CKVIHAV | 17 Inches | DIY tasks, small projects, irrigation, crafts |
| 2 Inch PVC Elbow Fitting – 22.5° | LESSO America | 2″ size | Direction changes in piping runs; center and corner connections |
Schedule 40 PVC Pipe — 0.84″ OD, 18″ Length
This rigid white PVC pipe is sized for precise plumbing and construction projects. The 0.84 inch outer diameter (OD) and 0.622 inch inner diameter (ID) enable accurate fittings and clean joints. It is rated for up to 600 PSI, making it suitable for standard residential and some commercial water pressure installations. Typical uses include residential plumbing, drainage, pool and spa lines, and cold water systems. When selecting pipe length for a project, ensure you account for solvent cement joints, fittings, and any required reducers or adapters.
Applications often include drainage lines in basements, supply lines for outdoor systems, and non-potable water routes where high-pressure tolerance is beneficial. The 18 inch length is convenient for shorter runs or for splicing into longer assemblies. For best results, pair with compatible Schedule 40 fittings and primer/cement designed for potable or non-potable use as appropriate.
3/4 In Schedule 40 PVC Pipe — 18”
White PVC pipe with red potable-water print, designed for pressure-use within potable water systems. This 3/4 inch pipe is appropriate for residential applications where flow is modest and temperature remains within standard limits. The pipe is intended for systems that will not exceed 140°F, offering predictable performance in typical home plumbing and irrigation setups. The 18 inch length supports small to medium-scale projects, service lines, or short drop runs between fixtures.
When planning, consider the maximum recommended operating temperature, the pressure rating, and the availability of compatible fittings. PVC Schedule 40 is widely used because of its balance of rigidity, ease of cutting, and solvent-weld joining. Ensure you select primer and cement suitable for potable or non-potable usage, depending on your project needs.
2 Inch PVC Pipe — 17” Long
CKVIHAV offers 2 inch Schedule 40 PVC pipe in a compact 17 inch length, suitable for a range of DIY projects, greenhouse setups, and small furniture frames. With an outer diameter of 2.375 inches and an inner diameter of 2.04 inches, this pipe supports robust construction while remaining easy to handle. The material provides UV resistance and impact resilience, making it appropriate for indoor or outdoor installations. Installation typically requires primer and solvent cement for secure, leak-free joints.
The 2 inch size is a versatile standard for projects that require more flow than smaller pipes but still benefit from compact dimensions. When cutting to length, use a miter saw with a PVC blade or a fine-toothed hand saw for a clean edge. Always verify compatibility with fittings and connectors before purchasing a bundle for a specific build.
4 Pieces — 2 Inch Schedule 40 PVC Pipe, 17” Long
This pack includes four 2 inch Schedule 40 PVC pipes, each 17 inches long, designed for DIY builds and project framing. The outer diameter about 2.3 inches provides sturdy structural support while the 2 inch size is a common standard for framing and light furniture projects. The pipes are UV-resistant and suitable for indoor or outdoor use, with a smooth surface that enables precise cutting and clean joints. As with all PVC builds, confirm size compatibility with your intended connectors, and plan for adequate waste and waste-disposal considerations when cutting multiple pieces.
2 Inch PVC Elbow Fitting — 22.5 Degrees
This 22.5 degree elbow from LESSO America is designed for 2 inch PVC piping runs. The elbow is crafted from SCH 40 PVC, providing adequate rigidity, frost resistance, and corrosion resistance for long-term use. The socket ends allow for quick installation with primer and solvent cement, reducing assembly time and ensuring a secure connection. Use this fitting to maneuver around corners or to redirect flows in a project without compromising pipe strength or alignment.
In addition to pipe sections, consider matching elbows, tees, couplings, and adapters to create a complete system that meets your flow and pressure needs. Always verify compatibility across all components, including wall thickness, schedule rating, and temperature limits, to avoid joint failure or leaks in demanding environments.
Buying Guide: Key Considerations For PVC Pipe Purchases
When selecting PVC pipe and fittings, buyers should evaluate several factors to ensure a durable, reliable install. The following considerations cover common scenarios and how to compare options:
- Schedule and wall thickness: Schedule 40 is standard for most residential and DIY uses, offering a balance of strength and flexibility. For higher pressure or outdoor exposure, consider Schedule 80 or higher-grade fittings where applicable.
- Diameter and inner/outer dimensions: Measure the required flow and space. OD controls fitment with standard fittings, while ID affects the internal flow rate. Small differences matter for tight assemblies.
- Pressure rating and temperature limits: PVC pipes list a maximum PSI and operating temperature. Choose products that align with your system’s pressure and ambient temperature to prevent failures.
- Potable vs non-potable use: Some pipes are printed for potable water and adhere to safety standards. Ensure you select the correct pipe type for drinking-water applications if needed.
- Indoor vs outdoor durability: UV resistance and exposure durability influence long-term performance for outdoor installations. If exposed to sunlight, UV-stabilized PVC is recommended.
- Fittings and solvent cement: All joints require compatible primer and solvent cement. Verify that the adhesive is rated for the intended use (potable water, pool, drainage, etc.).
- Installation space and tool access: Shorter pipe lengths simplify cutting and handling but may require more joints. Plan for the number of pieces and the total assembly time.
- Financial and material considerations: While PVC is generally affordable, costs accrue with longer runs and additional fittings. Compare bundles to determine the most cost-effective configuration for your project.
- Compatibility with accessories: Elbows, tees, and reducers must match the pipe’s size and schedule. Consider pre-planned layouts to minimize mismatches and waste.
Overall, PVC pipe is favored for its rigidity, chemical resistance, and ease of installation. For outdoor projects or high-traffic installations, ensuring proper protective measures (such as frost-resistant components and proper burial depth for drainage) is essential. By selecting the right diameter, wall thickness, and fittings, homeowners can achieve durable results with straightforward assembly.